Pet Door for Beverly Hills homes
Beverly Hills is large estates and condos with high-net-worth homeowners, and the pet door scope here is dominated by the coyote corridor running through the hills above Sunset and Coldwater Canyon. Any Beverly Hills home above Sunset, in the flats backing onto the canyons, or in the hills proper sits inside an active coyote zone, and a plain hinged pet door on an exterior wall is a documented intrusion path — coyotes push the flap, the flap opens, the small dog or cat the door was meant for becomes the target. The pro recommendation in Beverly Hills hills is electronic microchip-activated only: SureFlap microchip flaps physically lock the flap unless your specific pet's chip is at the threshold.
Inside the home, Beverly Hills installs are premium-tier — High Tech Pet's heavy-duty weatherproof aluminum-frame units with electronic collar-tag readers are the common pick at $300 to $420 for the unit plus $200 to $380 in labor. Custom-fit framing on solid-wood Spanish-revival or Mediterranean-style doors adds $60 to $120. Total spend on a Beverly Hills electronic install runs $560 to $920 including the unit. The pro should also assess whether the install needs a wall-mount tunnel rather than a door-mount for insulation reasons in larger estate homes — wall-mount adds $80 to $160 for stucco patching and color-matching paint on the exterior.
About pet door
Pet door installation is the process of cutting a properly sized opening into an exterior door, an exterior wall, or a sliding glass slider, mounting a weatherproof flap or electronic gate, sealing the perimeter against drafts and water, and verifying the pet actually walks through it. In Los Angeles the work spans four common formats: a door-mount install where the pro cuts a rectangle into a wood, fiberglass, or metal exterior door using a template and a jigsaw and screws the flap frame through both faces; a wall-mount install where the pro cuts through drywall, framing, sheathing, and stucco or siding to run a tunnel through an exterior wall; a sliding glass insert where the pro adjusts the slider track and drops in a vertical panel with a flap built in (no cutting, fully reversible); and an electronic microchip-activated install where the same physical opening hosts a smart flap that only unlocks for your pet's chip or collar tag. A typical door-mount job takes about two hours, a wall-mount four to six, a glass insert under thirty minutes, and an electronic install adds programming and chip-pairing time on top.
Read the full Pet Door guide →Pricing in Beverly Hills
$140–420 typical range for Beverly Hills jobs.
Door-mount pet door installs run $140 to $280 in labor in Los Angeles for a standard wood, fiberglass, or hollow-core exterior door. The pro brings a template, a jigsaw, a drill, and weatherstripping, cuts the rectangle, mounts the inside and outside frames, screws them through, and seals the perimeter. Steel security doors and metal-clad fire doors run higher because cutting them requires a metal-cutting blade and the cut edges need rust-proofing — budget $200 to $340 for those. The flap unit itself is separate hardware, usually $40 to $180 for a PetSafe or SureFlap consumer model.
Beverly Hills pet door FAQ
Can I install a plain hinged pet door in Beverly Hills?+
Not on any exterior application above Sunset or in the canyons. There are documented coyote intrusions through plain flaps in the Beverly Hills hills, and most pros will refuse to install one on an exterior door for your pet's safety. Use electronic microchip-activated only.
Which electronic flap brand is best for Beverly Hills hills?+
SureFlap microchip flaps for cats and small dogs (scans the pet's existing chip, $180 to $260 per unit). High Tech Pet's heavy-duty aluminum-frame collar-tag units for medium and large dogs and for wall-mount installs ($300 to $420 per unit, weatherproof, salt-air-rated).
Does the install include custom framing for my Spanish-revival doors?+
Yes, for solid-wood arched or oversize doors. The pro frames a square opening inside the door, fits the flap to the framed opening, and trims around the perimeter. Adds $60 to $120 to the standard install labor.
What does a Beverly Hills electronic install cost?+
$200 to $380 in labor plus $180 to $420 for the electronic unit. Custom-fit on a non-standard door adds $60 to $120. Wall-mount adds $80 to $160 for stucco patching. Total spend $560 to $920 for a clean electronic install in a hills home.
Every pet door pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →