Pressure Washing for Beverly Hills homes
Beverly Hills pressure washing is dominated by large driveways — 1,500 to 3,000 square feet is common in the flats and the lower hills, and pre-1950 estates above Sunset can run larger. The work scale is genuinely different from a standard residential driveway: a single Beverly Hills driveway-only wash covers the same square footage as a typical whole-property bundle elsewhere in LA, and pricing reflects that. Plan $480-980 for a comprehensive driveway and motor-court wash, more for properties with multiple driveways or extended hardscape that connects house, garage, and motor court.
The other dominant scenario is monthly maintenance contracts on stucco facades. Premium homes in Beverly Hills almost always have stucco — sometimes original, sometimes more recent restoration — and stucco needs soft-wash chemistry rather than high-pressure mechanical cleaning. High pressure on stucco erodes the texture, exposes hairline cracks, and forces water into the substrate where it triggers efflorescence weeks later. A proper stucco soft-wash uses a sodium hypochlorite mix at low pressure (under 1500 PSI) applied with a downstream injector, dwells, and rinses gently. Pros who hold monthly maintenance contracts with Beverly Hills properties will quote $380-680 for a single stucco wash visit, with a discount for contracts. The work keeps the property camera-ready and prevents the slow algae and mildew accumulation that becomes a much harder cleaning job after a year of neglect.
About pressure washing
Pressure washing is the use of pressurized water — sometimes combined with cleaning detergents and soft-wash solutions — to remove dirt, oil stains, gum, mildew, algae, pollen, soot, bird droppings, and accumulated grime from exterior surfaces around a home. The work spans driveways and concrete walkways, vinyl and stucco siding, wood decks and fences, patios and pool decks, brick walls, and even roofs when handled by experienced pros. Despite the name, pressure washing is rarely about pressure alone. The right approach matches a specific PSI range to each surface, pairs water with the correct detergent for the contamination type, and adjusts the spray angle and tip distance so that hard surfaces get clean while delicate surfaces stay intact. A driveway with embedded oil stains might need 3000-plus PSI and a degreaser to lift the contamination, while a wood deck right next to it should never see anything above 1500 PSI without splintering or etching the grain.
Read the full Pressure Washing guide →Pricing in Beverly Hills
$140–480 typical range for Beverly Hills jobs.
Driveway-only pressure washing in Los Angeles runs $140-240 for a small to medium residential driveway (one or two-car wide, 30-50 feet long) on standard concrete. This covers a degreaser pre-treatment for any oil spots, surface-cleaner pass at 3000-plus PSI for an even, wand-mark-free finish, edge work along garage door and walkway transitions, and a final rinse. Larger driveways — three-car or extended length on hillside properties — run $200-340. Driveway-plus-walkway combos are the most popular small job at $180-320, because the same setup time covers both surfaces and pros price the bundle better than two separate visits.
Beverly Hills pressure washing FAQ
My Beverly Hills driveway is 2,500 square feet — what should I budget?+
$480-780 for a comprehensive wash including degreaser pre-treatment for any oil staining, surface-cleaner pass at 3000-plus PSI, edge work along garage doors and walkway transitions, and a final rinse. Properties with motor courts that connect house and garage run higher, $580-980, depending on total square footage.
Should I get a monthly maintenance contract?+
If your stucco shows any tendency to algae or mildew accumulation, yes. Monthly soft-wash maintenance is substantially cheaper than annual recovery washes, and it keeps the property camera-ready. Discount on contract pricing typically runs 15-25% versus single-visit rates.
Can I use high pressure on my stucco?+
No — stucco requires soft-wash chemistry at low pressure (under 1500 PSI). High pressure erodes the texture, exposes hairline cracks, and drives water into the substrate where it causes efflorescence weeks later. A pro using high pressure on stucco is the pro who creates problems you'll pay to fix later.
Do you handle plant protection on a Beverly Hills property?+
Yes — proper plant protection is standard on premium properties with mature landscaping. The pro saturates planting beds with fresh water before any chemistry is applied, tarps sensitive plants, and rinses continuously near the work area. Plant damage from runoff is one of the highest-cost mistakes in pressure washing, and a Beverly Hills-experienced pro builds protection time into every quote.
Every pressure washing pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →