TV Mounting Cost in Los Angeles (2026 Guide)

Standard drywall TV mount: $80–$220

About 70 percent of Los Angeles TV mounting jobs are a flat-screen on a standard drywall wall over wood studs. For a 32–55 inch TV with a fixed (non-tilting) bracket and zip-tied cable management down the side, the typical LA price is $80–$140. For a 55–75 inch TV with a tilting or full-motion bracket and an in-wall paintable raceway hiding the cables, expect $140–$220. Anything below $80 is usually a side gig pricing for cash without insurance — not necessarily bad work, but no recourse if something goes wrong.

What's actually included at this price: locating studs with a stud finder, drilling pilot holes, securing the bracket with the correct lag bolts, hanging the TV, leveling, and connecting your existing HDMI/power cables. Most pros bring a small bubble level and check it from across the room before signing off, which matters more than people realize — a TV that's a half-degree off level reads as off from the couch.

What's not included unless you specify: hiding cables fully in-wall, mounting bracket if you don't already have one (typically $30–$80 for a quality bracket the pro brings), or moving an electrical outlet to behind the TV (that's electrician work, not handyman scope).

Above-fireplace TV mount: $180–$420

Mounting a TV above a fireplace in LA is a different job, even though it sounds simpler. The pro is dealing with brick, stone, or stucco rather than drywall — different drill bits, masonry anchors instead of wood-stud lag bolts, and a much higher chance the bracket will pull out years later if installed wrong. For a Spanish-revival home with original 1920s brick chimney in Silver Lake or Hancock Park, or a mid-century stone fireplace in Pasadena, expect $250–$420. For a modern stucco-faced linear fireplace in a DTLA condo or West Hollywood townhouse, $180–$300 is more typical.

The other variable above-fireplace is cable routing. There's no easy path down through brick — pros either route cables along the side and into a wall on the side of the fireplace, or use an in-wall power kit (Arlington TVBR or similar) that lets you drop cables behind the fireplace surround if there's a chase. Each option adds $50–$150 to the base mount price.

One thing to know: TVs above fireplaces get hot. Most fireplace inserts in LA homes don't actually push enough heat to damage a modern TV at the typical 6+ foot height, but if your fireplace is a heavy-use wood burner with no mantle deflecting heat, ask the pro to discuss whether the TV mount height is high enough.

Cable concealment levels: what each looks like

Cable concealment is where TV mounting jobs differ most from each other. Three typical levels in LA:

• Level 1 — zip-tied cables along the wall ($0 add-on): Cables run from TV down to power outlet, gathered with zip ties or a fabric cord cover. Cheap, fast, and visible. Fine for a kid's room or guest bedroom; reads as low-effort in a living room.
• Level 2 — in-wall paintable raceway ($30–$60 add-on): A flat plastic channel runs vertically down the wall, painted to match. Cables hidden inside. Usable in living rooms, looks much cleaner than zip ties, and easier than full in-wall pull because the raceway sits on top of drywall.
• Level 3 — full in-wall fish-pull with recessed power kit ($80–$150 add-on): Pro cuts a small hole behind the TV, fishes the HDMI and a code-compliant power extender (Arlington TVBR, Echogear EGFP) down through the wall cavity, and exits behind a flush plate near the floor outlet. No visible cables at all. This is what most LA homeowners want for a living room setup — looks fully professional and adds maybe 30–45 minutes to the install.

What changes the quote up: 5 common variables

Beyond the base mount type and cable level, five things most often push an LA TV mounting quote up:

• TV size over 75 inches: heavier TVs need stronger brackets and sometimes two-stud mounting. Add $30–$80.
• Articulating (full-motion) brackets: more complex install with more degrees of freedom to level. Add $20–$50.
• Plaster walls (1920s–40s LA homes): plaster crumbles with standard drywall anchors — pro needs masonry-style toggle bolts and careful drilling. Add $40–$80.
• Tile or stone backsplash above fireplace: tile drilling adds time and risk. Add $50–$120.
• Soundbar mount as part of the same visit: Add $40–$80 for proper anchoring and cable routing.

What you can supply to lower the quote

Two things you can do to keep the quote at the lower end:

First, buy your own bracket. Most pros are happy to install a homeowner-supplied bracket as long as it's a real VESA-rated mount (not a no-name $20 special). Sanus and Echogear are the consumer brands LA pros mention most often; both make solid mounts for $40–$80 in the 32–75 inch range. The pro then doesn't markup the bracket, and you save $20–$40.

Second, clear the area beforehand. If the pro doesn't have to move furniture, take down old wall art, or work around your existing TV setup, the install runs 20–30 minutes faster. Some pros pass this savings on, especially if you're a repeat customer or the visit is bundled with another job (anchoring tall furniture, a soundbar mount, or a closet shelf install).

How LA pricing compares to Thumbtack or Yelp

Anecdotally, LA TV mounting pricing on Thumbtack, Yelp, and direct local pros all fall in roughly the same $80–$220 band for standard jobs. The differences show up in two places: lead-funnel cost and repeat-customer pricing. Platforms that charge pros high lead fees ($35–$80 per lead on Thumbtack for higher-value categories) or take a percentage of the job mean those costs flow into the quote. A flat per-lead model like ours ($15) doesn't push the pro to pad the quote to recover platform overhead.

Repeat-customer pricing is where direct-relationship platforms win over time. A pro you've used twice already knows your house, your wall types, your bracket preferences — the third visit is faster and often cheaper than the first quote you'd get from a stranger.