Furniture Assembly for Brentwood homes
Brentwood is large lots with mid-century moderns, traditional, and contemporary homes — high-net-worth, family-oriented, often with playrooms or media rooms requiring complex modular furniture. The recurring assembly is an IKEA Stuva or Trofast playroom system: 200+ pieces of modular kid storage, plus a Pax wardrobe in the master bedroom, plus possibly a desk-and-bookcase combo for a home office. A flat-rate full-day quote ($520–820) handles a family-room playroom plus master bedroom.
Brentwood homes tend toward 9 to 10 foot ceilings and hardwood floors, both of which are friendly for assembly — Pax 93-inch fits with clearance, and floor protection is straightforward. The challenge is the volume and modularity of children's storage systems: a single Stuva combination has 50 to 100 small parts (drawers, dividers, doors, runners), and missing or mis-sorted hardware adds 30 to 60 minutes per occurrence. A pro who builds Stuva regularly will inventory all hardware first, separate by part number, then build. Pricing: $100–220 per piece, $360–620 for a master bedroom, $520–820 for a playroom plus bedroom.
About furniture assembly
Furniture assembly is the process of building flat-pack and partially assembled furniture from boxed components into a finished, stable, level piece. The work covers reading the manufacturer instructions, sorting and inventorying hardware, joining panels with cam locks or dowels, attaching fasteners in the correct sequence, and squaring the unit so drawers slide and doors align. A standard IKEA dresser takes 45 to 90 minutes when done correctly. A multi-section Pax wardrobe with sliding doors takes three to five hours. The skill is less about strength and more about patience, the right Allen keys, and knowing which steps cannot be reversed once a panel is glued or a cam is fully tightened.
Read the full Furniture Assembly guide →Pricing in Brentwood
$60–180 typical range for Brentwood jobs.
Standard IKEA assembly in Los Angeles runs sixty to one hundred eighty dollars per piece for the labor alone. A Malm bed frame is on the lower end at sixty to ninety dollars and takes about an hour. A standard four-drawer IKEA dresser is eighty to one hundred twenty dollars. A Billy bookshelf is sixty to ninety dollars. A single Kallax in any size is sixty to one hundred dollars. Most LA pros set a minimum visit fee of seventy-five to one hundred dollars, which means combining two or three pieces into one visit usually delivers better value per piece than booking them separately across different days.
Brentwood furniture assembly FAQ
Can you build a full IKEA Stuva or Trofast playroom system?+
Yes. Plan 4–6 hours for a 6-section combination, 6–8 hours for a 10-section combination. The pro inventories hardware first and builds in sections so you can use part of the room while the rest is being completed.
Will the 93-inch Pax wardrobe work in my master bedroom?+
Almost always — Brentwood ceilings are typically 9 feet (108 inches) or more. The 93-inch Pax fits with about 15 inches of clearance for installation.
How long does a master bedroom plus playroom take?+
Full day: 7–8 hours for a master bedroom set (bed, dresser, two nightstands, Pax wardrobe) plus a 6-section Stuva playroom. Plan ahead to clear both rooms before the pro arrives.
Can you anchor children's furniture for safety?+
Yes — every tall children's piece (dresser, wardrobe, bookcase) should be anchored to the wall with a tip restraint. A vetted pro will install the anchor as standard, not as an add-on.
Every furniture assembly pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →