Mailbox for Brentwood homes
Brentwood mailbox work mirrors Beverly Hills in scope — large estate lots, premium materials, decorative architectural units set into stuccoed or stone driveway-entrance columns. Whitehall cast aluminum is the dominant choice across the estate streets, with custom wrought-iron units on the more ornate properties and the occasional Architectural Mailboxes contemporary on the modern remodels. Plain plastic curb-side boxes are essentially nonexistent on the visible streets. The carrier driving the route at the long Brentwood driveways pulls up to a column-mount or post-mount unit at the entrance; walking-route delivery is uncommon outside the smaller estate lots.
Pricing reflects the premium direction. Whitehall column-mount install on existing stucco-over-block columns runs $280-450; the masonry drilling and careful anchor selection drive the labor cost. Custom wrought-iron and decorative architectural units run $300-580 install on existing columns. Standard post-mount installs at the driveway entrance run $200-380 with concrete and the heavier mounting hardware that decorative units require. Multi-property bundling — front gate mailbox plus side service entrance mailbox plus optional pool-area wall-mount — is common on larger Brentwood estates, and a single visit covering 2-3 boxes is more cost-effective than separate calls. USPS regs apply on column-mount and post-mount installs uniformly. A pro working Brentwood regularly will confirm the height and curb distance numbers before pouring concrete or drilling anchor holes, because the carriers in this area run consistent routes and notice spec deviations quickly.
About mailbox
Mailbox installation is the process of selecting, mounting, and securing a residential mailbox so that it meets United States Postal Service delivery standards, holds up to wind and weather, and looks like it belongs to the home it serves. The work covers four common types: a post-mount mailbox at the curb, a wall-mount box next to the front door, a locking anti-theft mailbox that swaps onto an existing post, and a column-mount unit set into a brick or stucco pillar at the driveway entrance. A simple wall-mount swap takes thirty to sixty minutes. A new post-mount install with a fresh hole and concrete takes two to three hours and a return visit the next day to verify the post has not shifted while the concrete cured. A column-mount install on existing masonry takes ninety minutes to two hours because the masonry drilling and the anchor selection are the slow parts.
Read the full Mailbox guide →Pricing in Brentwood
$80–280 typical range for Brentwood jobs.
Standard post-mount install in Los Angeles runs one hundred eighty to three hundred twenty dollars for the labor alone, assuming the pro is digging a fresh hole, setting a wood or metal post in fast-set concrete, mounting the box, and applying the address numbers. The job takes two to three hours of on-site work plus the cure time for the concrete, and most pros will return briefly the next day to verify the post is plumb before considering the work complete. A wall-mount install runs eighty to one hundred forty dollars because the labor is shorter and there is no concrete or masonry drilling involved. A simple locking mailbox swap onto an existing post runs one hundred to one hundred eighty dollars and takes thirty to sixty minutes, with the higher end of that range covering removal and disposal of the old non-locking box.
Brentwood mailbox FAQ
I have a stone column at my driveway entrance — does mailbox install differ from stucco?+
Yes. Stone column drilling is harder than stucco-over-block — the masonry bits wear faster, the drilling takes longer, and anchor selection is more careful because stone can spall under wedge-anchor pressure. Pricing on stone column installs runs $320-500 versus $280-450 for stucco. The pro needs a high-quality hammer drill and the right grade of masonry bits; confirm experience with stone before booking.
Can I bundle multiple gates and mailboxes into one visit?+
Yes, and bundling is more cost-effective than separate visits on a Brentwood multi-gate property. A typical visit covering driveway-entrance mailbox install ($280-450), side service mailbox ($150-250), and a related fence-gate hinge tighten ($120-180) runs $550-880 total versus $750-1,100 across three separate visits with mobilization. Confirm scope and pricing in writing before booking.
My driveway column needs repair before the mailbox can mount — same pro?+
Sometimes. Some pros handle masonry repair (cracked stucco, spalled stone, minor block work) plus mailbox install; many don't. If the column needs significant repair before the mailbox can mount, the masonry contractor handles the column and the mailbox pro handles the install in a follow-up visit. Sequencing the work — column repair first, mailbox after the masonry cures — matters for the durability of both.
Can the pro install a custom wrought-iron mailbox?+
Yes if the unit is fabricated and ready to install. The mailbox install pro handles the mount onto the existing column or post; custom wrought-iron fabrication is a separate scope handled by an iron fabricator. Install pricing on a heavier custom unit runs $300-580 depending on weight and mount type. Confirm the unit ships with appropriate mounting hardware before booking.
Every mailbox pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →