Fence / Gate for Culver City homes
Culver City's housing dates heavily to the 1940s-50s tract-home boom, and a remarkable amount of original chain-link fence from that era is still standing. Galvanized chain link, when the coating stays intact, lasts essentially indefinitely — a 1955 chain-link fence around a Culver City backyard often just needs mesh patching, top-rail straightening, and the occasional post replacement, not full replacement. The work is industrial-cheap compared to wood: chain-link mesh patching runs $180-380 per section, bent pole straightening $120-280, full pole replacement $180-320 each.
The flip side is that 1940s-50s chain link reads as dated to many current Culver City homeowners — the neighborhood's gentrification toward film/tech workers has produced ongoing replacement of legacy chain link with cedar pickets or horizontal cedar slat fences. If you want to keep the chain link for utility purposes (dog containment, security on a side yard, low-maintenance perimeter), patching is the cost-effective path. If curb appeal is the priority, full replacement with cedar runs $35-80 per linear foot. Wood fence repairs in Culver City follow the LA standard pattern: ground-line rot on cedar pickets after 8-12 years, sagging gates from tilted posts, single board replacement at $80-160.
About fence / gate
Fence and gate repair is the work of restoring a residential perimeter — wood pickets, vinyl panels, chain link, or a mix — back to a state where the gate swings true, the line is plumb, and nothing is rotted, leaning, or splintered. The work covers a wide range. On the small end, you have a sticky gate latch that won't catch, a single broken board, or a sagging gate that drops when you open it. In the middle, you have rotted ground-line boards that need replacement, posts that have lost their concrete, or torn chain-link mesh after a tree branch came down. On the large end, you have full section reset after a car backed into the fence, a row of three or four posts that all rotted at the same time, or a vinyl panel run that cracked from sun and wind exposure. Most LA homeowners book fence repair before listing a property, after a windstorm, or when a neighbor finally complains about the leaning section.
Read the full Fence / Gate guide →Pricing in Culver City
$180–650 typical range for Culver City jobs.
Sagging gate fix in Los Angeles runs $180-320 in labor when the existing posts are sound. This covers re-hanging the gate on the existing post, installing a turnbuckle diagonal brace from the upper hinge corner to the lower latch corner (the standard fix for any gate over 36 inches wide), tightening or replacing hinges, and adjusting the latch strike. Most jobs in this range take 60-90 minutes. If the post is rotted and needs replacement, the price climbs into the post replacement range below — a pro should diagnose this before quoting, not after starting work.
Culver City fence / gate FAQ
My 1955 chain-link fence is still up — is it worth keeping?+
If the galvanized coating is intact (no visible rust, mesh hasn't started to break down at the bottom), yes. Patching mesh tears, straightening bent poles, and replacing the occasional post is far cheaper than full replacement and the fence will last another 30+ years. Total typical patch maintenance: $300-700 every 5-10 years.
How do I tell if my chain link is past saving?+
Look at the bottom 6 inches of mesh and the post bases. Significant rust pitting or holes in the mesh, more than 30% of the poles bent or rusted at ground line, or visible thinning of the wire — that's past patch and into replacement territory. If less than 20% needs work, patching is the right call.
What does it cost to replace chain-link with cedar in Culver City?+
Removal of old chain link runs $8-15 per linear foot. New cedar fence install runs $35-80 per linear foot depending on style and height. A typical Culver City backyard perimeter (120-160 linear feet) totals $5,000-12,000 for full replacement. Compare that to $500-1,500 for full chain-link maintenance and decide based on priorities.
My side-yard gate on the chain-link fence won't latch — fix or replace?+
Almost always a fix. Chain-link gate latches are standard parts ($15-30 retail) and the gate frame is steel that doesn't rot. Latch swap runs $80-140, hinge tightening or replacement is included. If the gate frame itself is bent (often from impact), straightening or frame replacement runs $180-320.
Every fence / gate pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →