Skip to main content
Shatun Brothers
$60–160 typical range

Picture / Shelf in Culver City, Los Angeles

Vetted handymen serving Culver City. Identity-verified through Persona, with optional Insurance and License badges. Free quotes in 60 seconds.

Coverage: Culver City (90230, 90232)

Picture / Shelf for Culver City homes

Culver City is a mix of 1940s and 1950s bungalows and modern townhomes near the studios. The original bungalows have wood paneling on accent walls and lath-and-plaster on the rest; the townhomes have modern drywall over wood or metal studs depending on construction year. Tech-industry homeowners here often want clean modern arrangements — large statement pieces, minimal floating shelves, integrated cable management for any media art frames. That changes the conversation from gallery-wall layout to single-piece precision. A pro will measure carefully, level the bracket to better than half a degree, and use stainless or hidden hardware where the look matters.

Pricing for a single frame on Culver City drywall runs $60 to $100, with the original bungalow paneling and plaster hangs running $90 to $140 because of the slower drilling. A large heavy statement piece (40 to 80 pounds) runs $160 to $240. Floating shelves run $100 to $160 each on standard drywall, $140 to $200 on plaster or paneling. Most townhomes here have HOAs but they are typically lenient about interior wall hanging — check your CC&Rs to be safe. Mention paneling and any media frames with cable runs when you book.

About picture / shelf

Picture and shelf hanging is the work of getting framed art, mirrors, canvases, and wall shelves up on the wall straight, level, and rated for the weight they carry. The job sounds simple and sometimes is — a single 8x10 frame with a sawtooth hanger on a wood stud takes fifteen minutes. The complications appear quickly: a 60-pound antique mirror over a Beverly Hills fireplace, a 9-piece gallery wall in a DTLA loft where every frame has to land on a grid, or a pair of floating shelves loaded with books in a Santa Monica condo where every wall point misses the studs. Each scenario uses different hardware, different anchors, and a different layout method. The skill is matching the right approach to the wall material, the weight, and the visual outcome you want.

Read the full Picture / Shelf guide →

Pricing in Culver City

$60–160 typical range for Culver City jobs.

Single piece hanging in Los Angeles runs $60 to $100 for the labor on a standard frame on drywall. This covers stud finding, leveling, the right hanger for the frame's weight, and a clean installation. Most pros set a minimum visit fee of $60 to $80, which means a single small frame costs roughly the same as two or three. Combining multiple pieces into one visit is the right move on price — three to five frames in one visit usually runs $100 to $180 total.

Culver City picture / shelf FAQ

Can I hang on the original wood paneling in a 1940s bungalow?+

Yes with pilot holes through the panel into the lath or stud behind, and screws long enough to bite the substrate. The pro pre-drills carefully to avoid splitting the panel. Oak and pine paneling handle it fine; thinner veneers need extra care. Add $30 to $50 over the standard hang.

How do you hide cables for a digital art frame?+

Either an in-wall fish-pull from the frame down to a recessed outlet behind the frame (cleanest, $80 to $150 add-on) or a paintable surface raceway from the frame to the nearest outlet ($30 to $60 add-on). The pro will recommend based on the wall material and outlet location.

Does my new townhome have metal studs?+

Most Culver City townhomes built after 2010 have metal studs in interior partition walls. A magnet test confirms — if it sticks, it is metal. The pro switches to self-tapping toggle anchors and adds $20 to $40 per piece.

Can floating shelves hold a stack of books?+

Yes with the right anchoring. The hidden bracket needs to land in studs or use heavy-rated toggles. The pro will assess where the shelf can go, may shift the location by a few inches to land on studs, and confirm the load rating before drilling. A book-loaded shelf install runs $120 to $180.

Every picture / shelf pro verifies their identity

Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →

Other handyman services in Culver City

Need picture / shelf in Culver City?

Free, no signup, takes 60 seconds. We match you with vetted pros nearby.

Get a Free Quote