Simple Plumbing for Studio City homes
Studio City shares Sherman Oaks's housing profile — mid-century ranches and post-war single-family homes, mostly updated since the 2000s. The plumbing under the sinks is generally modern, the angle stops are mostly 1/4-turn, and the work is fast. The neighborhood demographic skews toward film-industry families with frequent kitchen remodels, which drives steady demand for disposal upgrades, dishwasher hookups, and post-remodel reconnection work.
Simple plumbing here lands at $100 to $200 for routine work — P-trap swaps, supply line replacements, angle stop swaps. Disposal installs run $150 to $250 with existing electrical. Dishwasher hookup is similar. The Studio City wrinkle is that older homes south of Moorpark sometimes have remodels that left galvanized supply behind the wall while updating only the visible fixtures — so a P-trap swap looks easy until the pro discovers the wall stub-out is corroded. Send a photo of the under-sink area when booking to avoid surprises.
About simple plumbing
Simple plumbing covers the small, single-fixture water work that keeps a kitchen, bathroom, or laundry running without calling in a licensed plumber for a full re-pipe. The most common simple-plumbing jobs are P-trap replacement under a sink, supply line swaps for a faucet or toilet, basket strainer replacement, fixture shut-off valve replacement at the wall, garbage disposal swap (where the existing wiring and drain are already in place), running drain clearing on a sink or tub, and washer hookup. The scope is intentionally narrow: one fixture, accessible connections, no opening of walls, no work behind drywall, no gas, and no sewer main. If the job stays inside that box, a vetted handyman can finish it in 30 to 90 minutes with parts from any hardware store.
Read the full Simple Plumbing guide →Pricing in Studio City
$100–320 typical range for Studio City jobs.
P-trap replacement and supply-line swaps usually run $80 to $160 in Los Angeles. The parts are inexpensive (a Plumbcraft P-trap kit is about $10, a Brasscraft braided supply line is about $8), and the labor is twenty to forty minutes once the cabinet is cleared. Pros who price below $80 are typically combining the visit with another job in the same building or block; pros who price above $160 for a single trap are usually adding a minimum truck-roll fee. Either approach is normal, just ask which one you are paying for.
Studio City simple plumbing FAQ
I'm doing a kitchen remodel — can a handyman handle the plumbing reconnect?+
Yes for fixture-level reconnect — sink set, P-trap, supply lines, angle stops, disposal. $200 to $350 in labor depending on scope. Anything new inside the wall or any rerouting of supply or drain needs a licensed plumber.
My disposal hums but doesn't grind — is that simple plumbing?+
Sometimes. If it's a jammed disposal, the unit can be reset and freed with the hex key in the bottom. $80 to $120. If it's a failed motor, replacement is the answer at $150 to $250 plus the unit.
Can a handyman swap a leaky shut-off valve in a 1955 Studio City home?+
Yes if the wall stub-out is in good shape. If it's galvanized and corroded, the swap may turn into a pipe repair. Pro should inspect before quoting.
What does a full under-sink refresh cost in Studio City?+
P-trap, two angle stops, two supply lines: $200 to $300 in labor, plus parts ($60 to $120). Common combo for homes that haven't had under-sink work in 15 years.
Every simple plumbing pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →