Washer / Dryer for Venice homes
Venice's housing mix runs from older bungalows on the canals and side streets to modern infill homes and live/work lofts. Marine air affects washer-dryer hardware here similarly to Santa Monica — cabinets and vent hose flanges show corrosion and finish degradation within 8 to 10 years versus 12 to 15 in inland LA. Smaller lots mean smaller laundry niches in many Venice bungalows, and stackable installs are a common request to free up floor space. Modern infill homes have clean PEX hookups and standard 27-inch laundry niches. Mixed renter and owner base means many installs happen at unit turnover.
For installs, modern infill bungalows and lofts run $140 to $260 for side-by-side, $200 to $300 for stacked. Older Venice bungalows with original 1940s-50s hookups run $180 to $320 including likely valve and vent hose work. Coastal corrosion on under-hookup hardware is more common here than inland — pros sometimes find the shut-off valve itself has corroded enough to need replacement even if it is not particularly old. Better-grade stainless braided supply lines hold up significantly longer in this climate, and the extra $15 to $25 on the lines pays back in years of additional service life. Stacking conversion is common in tight bungalow service porches. Earthquake straps are mandatory on stacked units. Whirlpool and LG units in stainless or matte black finishes are popular replacement choices for the coastal climate.
About washer / dryer
Washer and dryer installation is the work of placing two heavy appliances into a laundry space, connecting them to water, drain, electrical, and (for gas dryers) gas, and verifying that the first cycle runs without leaks, vibration, or vent issues. A washer alone weighs 200 to 300 pounds out of the box, a dryer adds another 100 to 150 pounds, and the connections behind them are the part that fails most often when the work is rushed. A proper install covers positioning the units in the laundry niche, hooking up the hot and cold water supply lines on the washer, securing the drain hose into the standpipe or laundry sink, plugging the washer into a 120-volt outlet, plugging an electric dryer into a 240-volt outlet (or connecting a gas dryer to an existing gas valve), attaching a 4-inch flexible vent duct from the dryer to the outdoor exhaust, leveling both units so the washer does not walk during spin, and running a short test cycle to confirm everything holds.
Read the full Washer / Dryer guide →Pricing in Venice
$140–380 typical range for Venice jobs.
Side-by-side install on existing electric hookups in Los Angeles runs $140 to $240 for the labor alone. This covers positioning the washer and dryer in the laundry niche, connecting hot and cold supply lines, attaching the drain hose, plugging in the 120-volt washer cord and the 240-volt dryer cord, attaching a flexible vent duct, leveling both units, and running a short test cycle. Most jobs in this range take 60 to 90 minutes from arrival to clean exit.
Venice washer / dryer FAQ
Why does coastal Venice need different appliance considerations?+
Marine air carries salt and moisture that pits cabinet finishes and degrades vent hose flanges within 8 to 10 years. Stainless steel and powder-coated finishes hold up significantly better. Spend the extra on a quality finish if the laundry niche is exposed to ventilation from the outside.
Are Venice canal-area homes harder for laundry installs?+
Not significantly. The canal proximity affects long-term moisture exposure but does not change the install workflow. Older bungalows have the same typical shut-off valve and vent hose workflow as other older LA neighborhoods.
Is stacking a common request in Venice?+
Yes. Small bungalow service porches and tight live/work lofts both benefit from stacked footprints to free up floor space. The kit is $60 to $130 manufacturer-specific and the lift takes a careful helper. Earthquake straps are mandatory.
Should I expect under-hookup hardware corrosion even in a relatively new home?+
Possibly. Coastal salt air reaches inside laundry niches through ventilation gaps, and lower-grade chrome shut-off valves can show corrosion within 8 to 10 years even in newer Venice homes. Upgrading to brass or stainless ball valves during an install is worthwhile preventive work.
Every washer / dryer pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →