Carpet / Rug for West Hollywood homes
West Hollywood's housing splits between dense single-family Spanish-revival and mid-century homes, multi-unit apartment buildings, and newer condos. Carpet installation patterns split similarly. Single-family homes follow the standard LA layout — hardwood living and dining, carpet in bedrooms — with older Spanish-revival homes occasionally hiding original hardwood under existing carpet (worth checking before replacement). Multi-unit and condo work is mostly turnover-driven, with bedroom carpet replacement between tenants or after long-term owner sales.
Standard LA pricing applies — single bedroom $180-380 in labor, master with walk-in $280-480, whole-home or whole-condo $580-1,000. WeHo's smaller lot sizes and older housing often mean smaller bedrooms (10x12 versus 12x14 elsewhere), which keeps cost on the lower end of the range. Concrete subfloor in newer condos adds $40-80 per room. HOA approval is sometimes required for condo work — confirm contractor licensing, insurance documentation, and install hours before booking. Pet-friendly carpet (Stainmaster, SmartStrand) is the popular WeHo choice in single-family homes because of high pet ownership rates; pad spec should include moisture barrier for any home with pets.
About carpet / rug
Carpet installation is the process of fitting and securing wall-to-wall carpet, stair runners, or large area rugs over a prepared subfloor and pad, using tackless strips, power stretchers, knee kickers, seam tape, and cut-to-fit techniques that lock the fibers in place for a decade or more of use. The job sounds simple — roll out carpet, cut to size, tuck the edges — but the difference between an amateur installation and a professional one shows within the first few months. A correctly stretched carpet sits flat across the entire room with no waves, ripples, or buckling along walls; the seams where two pieces of carpet meet are invisible from a normal standing height; the perimeter is tucked cleanly into a tackless strip so the edge holds without fraying; and the transition strips at doorways protect the cut edge from foot traffic. Most LA homeowners only think about carpet installation when they buy a new house, change tenants, or finally replace carpet that has matted down past the point of cleaning, but the quality of that one install determines whether the carpet still looks acceptable in year seven or whether you are pulling it out in year three.
Read the full Carpet / Rug guide →Pricing in West Hollywood
$180–650 typical range for West Hollywood jobs.
Wall-to-wall installation in a single bedroom in Los Angeles runs $180 to $380 for labor only, not counting carpet material or pad. This covers existing carpet and pad removal, tackless strip replacement, new pad installation, carpet rolling and rough-cut, full power stretching across the room, perimeter tucking, and one or two transition strips at doorways. Most single-bedroom jobs in this range take three to five hours including the haul-away of the old material. Below $180 usually means the pro is skipping power stretching, reusing old pad, or bundling with another job in the same building — the install will not last, or it is a turnover-grade rush job that prioritizes speed over quality.
West Hollywood carpet / rug FAQ
Should I check for hardwood under carpet in my West Hollywood home?+
If your home is pre-1960 Spanish-revival or mid-century, yes — pull up a corner in a back closet to check. Older WeHo single-family homes often have original oak or maple under bedroom carpet that was added in the 1970s-80s. If hardwood is intact, refinishing at $4-8 per square foot is usually the better answer than fresh carpet — lasts longer, raises value.
What pad and carpet works best in a pet household?+
Stainmaster Pet Protect or Mohawk SmartStrand mid-pile nylon is the LA pet-household standard — strong soil and stain resistance, $5-9 per square foot. Pad should be 8 lb high-density rebond with moisture barrier — the barrier prevents pet accidents from soaking through to the subfloor and creating long-term odor problems. The pad upgrade adds $0.20-0.40 per square foot and is worth it on any pet home.
Do I need HOA approval for condo carpet installation?+
Most WeHo condo buildings require notification rather than full approval, but check your HOA documents. Buildings typically specify licensed contractor with GL insurance, designated install hours (usually 9am-5pm weekdays), and freight elevator reservation. The pro should provide license and insurance directly to building management on request.
How much does a typical West Hollywood condo install cost?+
Single-bedroom condo install: $220-380 in labor (slightly higher than detached single-family due to concrete subfloor and elevator coordination). Two-bedroom condo: $480-800 in labor. Plus carpet material at $2-8 per square foot depending on grade. Total $700-1,500 for a typical 2-bedroom condo refresh including material.
Every carpet / rug pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →