Light Fixture for Beverly Hills homes
Beverly Hills homes are estates with statement chandeliers — Restoration Hardware orb pieces, Visual Comfort multi-tier, Currey & Company sculptural — in entryways, dining rooms, and primary living rooms. These fixtures run 25–80 pounds and require fan-rated brace boxes anchored between joists, sometimes with additional structural blocking added behind drywall. Vaulted and double-height ceilings (15–25 feet) require lift equipment and a two-person install. Many estates have multiple chandelier-grade fixtures on a single visit, with cable concealment and integration into a whole-home Lutron RA2 or Crestron system.
Pricing for a 25–50 pound chandelier on a standard 9-foot ceiling runs $300–500 including brace box and grounding. Vaulted-ceiling installs with lift equipment run $500–900. Multi-fixture visits (3–5 fixtures across a single home) run $1,500–3,500 depending on complexity and ceiling heights. Lutron RA2 or Caseta scene programming for a primary living area runs $800–1,500 with full smart integration. Statement chandeliers from Visual Comfort and Restoration Hardware ship with detailed assembly instructions — the pro will assemble on site before lifting.
About light fixture
Light fixture installation is the process of removing an old ceiling or wall fixture, mounting a new one to a fixture-rated electrical box, and wiring it through the existing circuit so it switches cleanly from your wall control. The work itself takes 30–90 minutes for a standard like-for-like swap, but the details that make a job last decades — the right box for the weight of the fixture, the ground wire correctly bonded, the dimmer matched to the bulb technology, the canopy sitting flush against the ceiling — are where most DIY installs and rushed handyman jobs fall apart.
Read the full Light Fixture guide →Pricing in Beverly Hills
$100–280 typical range for Beverly Hills jobs.
Standard fixture swap in Los Angeles — replacing an existing flush-mount or pendant with a new one, same wiring, standard 8-foot ceiling — runs $80–150 for the labor. This covers turning off the breaker, removing the old fixture, mounting the new one, wiring it up, and installing the canopy. Most jobs in this range are 45–60 minutes door-to-door.
Beverly Hills light fixture FAQ
I have a 22-foot vaulted ceiling — can I install a chandelier?+
Yes with a lift, a two-person crew, and a fan-rated or heavy-fixture brace box. The lift fits through a standard front door but the room must clear furniture during install. Plan a half-day. $500–900 for a 30–50 pound chandelier at vault height.
Can the pro install 4 chandeliers in one visit?+
Yes. Most Beverly Hills multi-fixture visits cover 3–5 chandeliers and several flush-mounts in a half-day to full-day window. Pricing scales with fixture weight, ceiling height, and brace box requirements.
Will my Restoration Hardware orb chandelier need structural blocking?+
Often yes. RH orb fixtures over 60 pounds usually require 2x6 blocking added between joists behind the drywall to spread the load. The pro will inspect from the attic (if accessible) or recommend opening the ceiling to add blocking. $200–400 for blocking work.
Can my Crestron system control new fixtures?+
Yes if the new fixture is dimmable and the circuit routes through your Crestron processor. The pro will install the fixture and coordinate with your Crestron programmer for scene integration. Programming itself is a separate AV task.
Every light fixture pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →