Mailbox for Beverly Hills homes
Beverly Hills mailbox work skews heavily premium. Most properties have decorative architectural mailboxes set into stuccoed or stone driveway-entrance columns, custom-fabricated wrought-iron boxes flanked by ornate gate posts, or column-mount Whitehall cast aluminum units in black or antique copper. The few wall-mount installs are on the smaller estate lots near the city's edges where the carrier walks the route. Plain plastic curb-side boxes are essentially nonexistent on the visible streets — they read as out of place against the scale and finish of the homes.
Pricing reflects the premium-material direction. Whitehall cast aluminum column-mount installs run $280-450 because the masonry drilling into stucco-over-block columns requires a hammer drill, the right diameter masonry bits, sleeve anchors or wedge anchors rated for the box weight, and the patience to drill four pilot holes without spalling the column face. Custom wrought-iron and decorative architectural units run $300-580 install on existing columns; column-construction-plus-install is a separate masonry scope. Wall-mount installs on the smaller estate lots run $100-180. Most Beverly Hills properties have one mailbox at the driveway entrance, occasionally a second wall-mount box at the front door for the walkable-route carriers — bundling both into one visit saves on mobilization. USPS regs apply on column-mount units the same as post-mount.
About mailbox
Mailbox installation is the process of selecting, mounting, and securing a residential mailbox so that it meets United States Postal Service delivery standards, holds up to wind and weather, and looks like it belongs to the home it serves. The work covers four common types: a post-mount mailbox at the curb, a wall-mount box next to the front door, a locking anti-theft mailbox that swaps onto an existing post, and a column-mount unit set into a brick or stucco pillar at the driveway entrance. A simple wall-mount swap takes thirty to sixty minutes. A new post-mount install with a fresh hole and concrete takes two to three hours and a return visit the next day to verify the post has not shifted while the concrete cured. A column-mount install on existing masonry takes ninety minutes to two hours because the masonry drilling and the anchor selection are the slow parts.
Read the full Mailbox guide →Pricing in Beverly Hills
$80–280 typical range for Beverly Hills jobs.
Standard post-mount install in Los Angeles runs one hundred eighty to three hundred twenty dollars for the labor alone, assuming the pro is digging a fresh hole, setting a wood or metal post in fast-set concrete, mounting the box, and applying the address numbers. The job takes two to three hours of on-site work plus the cure time for the concrete, and most pros will return briefly the next day to verify the post is plumb before considering the work complete. A wall-mount install runs eighty to one hundred forty dollars because the labor is shorter and there is no concrete or masonry drilling involved. A simple locking mailbox swap onto an existing post runs one hundred to one hundred eighty dollars and takes thirty to sixty minutes, with the higher end of that range covering removal and disposal of the old non-locking box.
Beverly Hills mailbox FAQ
I have a stuccoed driveway column — how does the mailbox mount into it?+
Hammer drill, masonry bits, sleeve anchors or wedge anchors rated for the box weight. The pro drills four pilot holes through the stucco-over-block column, sets the anchors, and bolts the box flush and plumb. The work requires masonry skill — getting a clean four-anchor pattern without spalling the stucco face is a skill that takes practice. Pricing $280-450 for cast aluminum, $300-580 for heavier custom architectural units.
Can the pro source a Whitehall mailbox or do I order it?+
Either. Many Beverly Hills homeowners order direct from Whitehall to choose the exact size, finish, and address-number style; the pro then installs the supplied unit. If the pro sources, expect a $50-100 markup over Whitehall direct pricing for the convenience. Whitehall delivery runs 1-3 weeks depending on finish — order early in the project timeline.
My existing column has a damaged mailbox — repair or replace?+
Almost always replace. A damaged column-mount mailbox usually means the anchors have failed, the box has been impact-damaged, or the box hardware (door hinges, latch) is past easy repair. Replacement with a new Whitehall or matching unit and fresh anchors runs $280-450 and resets the install for another 20+ years. Repair on a column-mount that's been hit is rarely durable.
What about a custom wrought-iron mailbox on my entrance gate?+
Custom wrought-iron mailboxes integrated with entrance gates are a different scope — the work is welding, rust treatment, and color-match repaint, not a standard mailbox install. Filter for pros with explicit iron and welding experience. Repair or replacement of integrated wrought-iron units runs $400-900 depending on complexity. The fence pro who handles your entrance gate is often the right party for this work.
Every mailbox pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →