TV Mounting for Highland Park homes
Highland Park homes from the 1900s–1920s are mostly craftsman and Victorian, which means lath-and-plaster walls with original wood trim throughout. First-time homebuyers in the neighborhood often inherit older mounting jobs done by previous owners — bracket holes patched poorly, sagging mounts, or surface-run cables — and want them redone properly. A pro who works Highland Park regularly will check whether the existing holes can be reused or if you need fresh anchors in undamaged plaster. Reusing failed anchor holes is one of the most common DIY mistakes here.
Pricing for a standard 55–65 inch mount runs $150–220 in Highland Park, with masonry surcharges if you're mounting above one of the brick fireplaces common in older homes ($80–120 add-on). Some Highland Park homes have stucco-clad interior walls in sunrooms or enclosed porches — those need masonry anchors, not drywall hardware. Mention any non-standard wall surfaces when you book.
About tv mounting
TV mounting is the process of securely attaching a flat-screen television to a wall, ceiling, or fireplace using a manufacturer-rated bracket. A proper mount distributes the TV's weight across studs or solid masonry, hides cables for a clean finish, and angles the screen for the room's seating layout. The work itself takes 60–120 minutes for a standard installation, but doing it right requires the correct bracket for your TV size, the right anchors for your wall material, and care to avoid damaging studs, electrical lines, or ductwork behind the drywall.
Read the full TV Mounting guide →Pricing in Highland Park
$120–280 typical range for Highland Park jobs.
Standard TV mount on drywall in Los Angeles runs $120–180 for the labor alone. This covers a flat or tilting bracket installation, leveling, and basic cable management down the back of the TV (not in-wall). Most jobs in this range take 60–90 minutes.
Highland Park tv mounting FAQ
The previous owner mounted a TV and the holes are visible — can a pro patch and remount?+
Yes. The pro will assess whether the old anchor holes are still structurally sound (often they're not — DIY mounts on plaster usually fail at the anchor point), patch them with plaster compound, and use fresh anchors a few inches over. Add $40–60 for the patch work.
Are Highland Park Victorian homes harder to mount on?+
The plaster is the same as craftsman, but Victorian homes often have decorative wood paneling or wainscoting that you don't want to drill through. The pro will plan around the trim and mount above or beside it where possible.
Can I get cable concealment in a 1910s home?+
Yes, but the wall cavity behind lath is shallower than modern drywall and the access cuts need careful patching afterward. Budget $130–180 for clean in-wall concealment in older Highland Park homes.
My home has a brick chimney — can the TV go above it?+
Yes. Highland Park's original brick chimneys are solid masonry and hold mounts well with the right anchors. Confirm the mantel height first — many are 50–58 inches, which puts the screen slightly above ideal seated viewing height.
Every tv mounting pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →