TV Mounting for Studio City homes
Studio City spans hillside mid-century moderns, Spanish-revivals near Ventura, and contemporary remodels throughout. The hillside homes often have post-and-beam construction with exposed wood and large glass walls — limiting where a TV can mount, since you don't drill into floor-to-ceiling glass. Mid-century homes sometimes have unusually thin interior walls that don't tolerate heavy mounts well; the pro will assess wall thickness before quoting. Entertainment-industry homeowners here often have premium AV setups with surround systems, projectors, and dedicated media rooms that need careful cable routing.
Pricing for a standard 65–75 inch mount runs $160–230. Hillside post-and-beam homes are easier to mount on (exposed wood beams are dream anchor points) but harder to conceal cables in (no wall cavity behind the beam). Mid-century moderns sometimes have Sheetrock walls over thin furring strips with no real cavity behind — those need careful anchor selection. Mention the home style and construction era when you book.
About tv mounting
TV mounting is the process of securely attaching a flat-screen television to a wall, ceiling, or fireplace using a manufacturer-rated bracket. A proper mount distributes the TV's weight across studs or solid masonry, hides cables for a clean finish, and angles the screen for the room's seating layout. The work itself takes 60–120 minutes for a standard installation, but doing it right requires the correct bracket for your TV size, the right anchors for your wall material, and care to avoid damaging studs, electrical lines, or ductwork behind the drywall.
Read the full TV Mounting guide →Pricing in Studio City
$120–280 typical range for Studio City jobs.
Standard TV mount on drywall in Los Angeles runs $120–180 for the labor alone. This covers a flat or tilting bracket installation, leveling, and basic cable management down the back of the TV (not in-wall). Most jobs in this range take 60–90 minutes.
Studio City tv mounting FAQ
Can I mount on an exposed wood beam?+
Yes — wood beams are excellent anchor points. Use lag bolts sized for the TV weight, pre-drilled to avoid splitting the beam. The pro will recommend bolt size based on beam dimensions and TV weight.
My mid-century has thin walls — can it hold a 75-inch TV?+
Depends on the construction. Some Studio City mid-centuries have Sheetrock over 2x4 studs (fine for 75-inch); others have thin partition walls with limited stud depth (max 55-inch). The pro will tap and measure before quoting.
How do I integrate a projector setup with TV mounting?+
Projector and TV are separate installs — the pro can mount the TV and recommend a projector specialist if you don't already have one. Most Studio City homes with both setups have them in different rooms.
Are hillside homes harder to work on?+
Slightly — limited parking and stair access add 15–30 minutes to the visit. Some pros add a $20–40 hillside surcharge; others don't. Confirm when you book.
Every tv mounting pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →