Door Installation for West Hollywood homes
West Hollywood is dense with 1920s-30s apartment buildings and modern condos, and the dominant door pattern here is unit-door replacement during high renter turnover. Landlords handling small apartment buildings often replace unit doors after lease cycles when the door has been kicked, scratched, or the lockset has been changed too many times by previous tenants. Standard interior or unit-door replacement runs $150 to $280 per door; apartment buildings with multiple turnovers in a year often book multi-unit jobs in single visits to share the trip charge.
WeHo also has a strong design culture, and barn doors are popular here as both a design statement and a space-saver in compact units. A traditional swinging door eats into limited apartment square footage; a barn door slides flush along the wall and reclaims that space. Real Sliding Hardware is the standard track, and the install depends entirely on what is behind the drywall above the opening — older WeHo buildings sometimes have weak headers that need reinforcement before a barn track can mount safely. A pro will check before quoting.
About door installation
Door installation is the process of fitting a new door — interior, exterior, sliding, or barn — into an opening so that it closes flush, latches without forcing, swings without dragging, and seals against drafts, sound, or weather. The work covers measuring the rough opening, choosing between a pre-hung unit (door already mounted in its frame) and a slab door (door only, reusing the existing frame), shimming and leveling the frame, hanging the hinges, drilling for the latch and strike plate, and finally adjusting the hardware so the door operates smoothly. A clean install ends with a door that latches with a soft click rather than needing a shoulder push, and a gap line around the perimeter that stays consistent from top to bottom.
Read the full Door Installation guide →Pricing in West Hollywood
$180–650 typical range for West Hollywood jobs.
Interior pre-hung door installation in Los Angeles runs $200–380 per door for labor. This covers fitting the unit into the rough opening, shimming plumb and level, securing the frame, hanging the door, and basic latch and strike plate alignment. Hardware (knob or lever set) is usually not included in the labor quote and runs $25–80 retail at Home Depot or $40–150 for upgraded Schlage / Kwikset finishes. Trim work — replacing the casing around the new frame — is sometimes included and sometimes a separate line item, so confirm.
West Hollywood door installation FAQ
I'm a small WeHo landlord doing unit-door turnover — what's a multi-unit visit cost?+
Five unit doors replaced in one visit usually runs $750 to $1,400 in labor, plus the door cost. Solid-core Masonite stock is the right call for unit doors — much better sound transmission and damage resistance than hollow-core. Expect to bundle this with rekey work; both jobs are routine handyman scope.
Can I install a barn door in my WeHo apartment?+
If you are a renter, ask the landlord first — this is a permanent installation and most leases require approval for changes. If you own, almost always yes. The install depends on whether the wall above the opening has a strong enough header for the track. Total cost $280 to $450 in labor plus $200 to $600 in hardware and door.
My WeHo apartment door has been kicked in — can a handyman replace just the door, not the frame?+
If the frame is undamaged, yes — slab swap runs $150 to $280. If the frame is bent or split, you need a pre-hung replacement at $200 to $380 in labor for interior or $380 to $650 for the unit's exterior door. Inspect the frame before booking.
Every door installation pro verifies their identity
Government ID + selfie liveness check via Persona — required for every listing. Pros may earn additional Insurance Verified and License Verified badges by uploading documents we check. Read our standards →