Kitchen repairs in Los Angeles
Faucet swaps, garbage disposals, backsplash, cabinet re-alignment, range hoods, under-cabinet lighting, appliance install. Handymen for finish work, licensed pros for gas, electrical, or structural.
What LA kitchen repairs involve
Kitchens in LA are where three trades meet: plumbing at the sink, electrical at every outlet and light, and often gas at the range. A handyman can swap a faucet, install a garbage disposal, tighten a cabinet, fix a drawer, adjust an appliance. Anything involving a gas line or a new circuit gets routed to a C-36 or C-10.
Most kitchen "repair" calls in LA are single-visit fixes — a loose disposal coupling, a faucet that drips at the base, a cabinet door sagging, an outlet that won\'t hold a plug. We finish these in under 2 hours. Backsplashes and under-cabinet lighting are half-day jobs.
Common kitchen jobs
How it works
Photos + brand/model of existing fixtures. Mention gas, electrical, or structural concerns.
Handyman for finish; C-36 plumber for gas; C-10 electrician for new circuit / GFCI panel work.
Faucet swaps 1–2 hrs. Backsplashes 4–8 hrs. Full kitchen refresh multi-day, sometimes multi-pro.
Los Angeles specifics
Gas appliances (CA code): any gas work past "plug in a flex line" requires a licensed plumber (C-36 with gas endorsement). Gas ranges and ovens installed / moved / converted (natural-gas to propane) need professional install and LADBS inspection if replacing.
GFCI outlets required: California Electrical Code requires GFCI protection on all kitchen countertop outlets. If yours aren\'t GFCI, any new outlet we install will be; existing ones we often swap as a safety courtesy.
Low-flow faucet / WaterSense: LADWP rebates apply to WaterSense-labeled kitchen faucets on new install. Program rotates — we\'ll check current window.
Range hood ventilation: California Title 24 requires ducted range hoods for gas cooking (recirculating hoods don\'t meet code for new install). If you\'re upgrading a hood, the pro checks that the duct runs to the outside — many older LA homes have recirculating-only venting.
Countertop weight limits: quartz and granite counters in older LA homes sometimes rest on weakened base cabinets. If you\'re replacing a sink, the pro inspects cabinet integrity — replacing rotten bottom plywood is sometimes part of the scope.
Typical kitchen pricing in LA
Labor-only below; fixtures and appliances extra.
Pricing is informational; LADWP rebates reduce net cost on WaterSense faucets. <!-- TODO: DENIS — verify -->
Frequently asked questions
Can you install my new faucet if I bought it online?
Yes, that's most common. Check that the faucet comes with supply lines; many online listings show complete sets but ship incomplete. Our pros keep standard supply lines in the truck if missing.
My garbage disposal hums but won't spin — repair or replace?
Usually a jam. We try the manual reset + bottom hex-key unlock first. If the motor is burned out, replacement is usually cheaper than repair for units older than 8 years.
How long does a backsplash install take in an LA condo?
Standard 10–20 sq ft subway backsplash: 6–10 hours including prep, layout, set, grout (next day), seal. Peel-and-stick: 2–3 hours same day. Mosaic with irregular patterns: add 50%.
Can you install a new gas range?
Yes, but a licensed plumber handles the gas line connection. Our C-36 pros install, test for leaks, and leave the appliance level and tested. If you're switching from gas to electric, that's electrical work — licensed C-10.
My cabinets are sagging — can they be saved?
Usually yes. Common fixes: shim the base, add or replace screws into studs (not just drywall), reinforce with internal brackets. If the cabinet box is structurally failed (water damage, rotted plywood), replacement is cheaper.
What about converting to an induction range?
LA rebates occasionally cover induction (LADWP and state electrification programs). We install; a C-10 runs the 240V circuit if you don't have one. Budget \$800–2,200 electrical + range cost + sometimes induction-compatible cookware.
How do I know if my range hood is actually venting outside?
Check the roof or exterior wall for a round metal hood cap with a damper. If you see nothing outside, it's recirculating (charcoal filter). Recirculating on a gas range is code non-compliant for new install in CA — we'll flag during scope.
Related services in Los Angeles
Ready to get it done?
Tell us what you need. We'll match you with a vetted Los Angeles pro.